TM-9-2320-366-20-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4 - Page 52 of 1558
TM 9-2320-366-20-4
7-81. FRONT INTERVEHICULAR 12 VDC (7 PIN) CABLE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-57).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 69, Appendix D)
Nut, Self-Locking (2) (Item 128, Appendix G)
WARNING
Wear appropriate eye protection when
working
under
vehicle
due
to
the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Disconnect connector J52 (1) from connector P52F (2).
(2) Remove two self-locking nuts (3), four washers (4), two
screws (5), and front intervehicular 12 vdc cable (6) from
vehicle. Discard self-locking nuts.
b. Installation.
(1) Install front intervehicular 12 vdc cable (6) on vehicle
with two screws (5), four washers (4), and two self-
locking nuts (3).
NOTE
Install plastic cable ties as required.
(2) Connect connector J52 (1) to connector P52F (2).
End of Task.
7-376
Change 1
Back to Top
