TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 709 of 1558

TM 9-2320-366-20-4

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(1) Apply antiseize compound to threads of branch tee fitting

(1), two 90-degree fittings (2), and run tee fitting (3).

(2) Install branch tee fitting (1) in inversion valve (4).

(3) Install two 90-degree fittings (2) in inversion valve (4).

(4) Install run tee fitting (3) in inversion valve (4).

(5) Position inversion valve (4) on panel (5) with two

washers (6), screws (7), and self-locking nuts (9).

(6) Tighten two self-locking nuts (9) to 14-18 lb-ft (20-24

N·m).

Change 1

11-79