TM 9-2320-366-20-4
11-22. SECONDARY AND PRIMARY AIR TANKS REPLACEMENT (CONT)
NOTE
Perform
step
(15)
on
all
models
not
previously equipped with corrosion enhanced
clamps.
(15) Position two clamps (13) on battery box (14).
(16) Position secondary air tank (7) in two clamps (13) with
self-locking nuts (14.1).
(16.1) Tighten two self-locking nuts (14.1) to 4-5 lb-ft (5-7 N·m).
(17) Connect air hose (15) to 90-degree fitting (1).
(18) Connect air hose (16) to 90-degree fitting (2).
(19) Connect air hose (17) to branch tee fitting (8).
(20) Connect air hose (18) to branch tee fitting (8).
(21) Connect air hose (19) to 90-degree fitting (10).
(22) Connect air hose (20) to 90-degree fitting (12).
11-140
Change 1