TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 785 of 1558

TM 9-2320-366-20-4

(14) Remove 90-degree fitting (4) from two-way check valve

(18).

(15) Remove 90-degree fitting (16) from two-way check valve

(18).

(16) Remove inversion valve (19) from reducer fitting (20).

(17) Remove reducer fitting (20) from two-way check valve

(18).

(18) Remove 90-degree fittings (9 and 11) from inversion

valve (19).

d. Secondary Air Tank Installation (M1088/M1089).

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(1) Apply antiseize compound to threads of 90-degree

fittings (1 and 2), threads on both sides of reducer fitting

(3), 90-degree fitting (4), and 90-degree fitting (5).

(2) Install 90-degree fittings (1 and 2) in inversion valve (6).

(3) Install reducer fitting (3) in two-way check valve (7).

(4) Install inversion valve (6) on reducer fitting (3).

(5) Install 90-degree fitting (4) in two-way check valve (7).

(6) Install 90-degree fitting (5) in two-way check valve (7).

11-143