TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 796 of 1558

TM 9-2320-366-20-4

11-23.

FRONT GLADHAND REPLACEMENT (CONT)

(5) Disconnect air hose (9) from 90-degree fitting (10).

(6) Remove 90-degree fitting (10) from adapter (6).

(7) Remove

nut

(11),

lockwasher

(12),

adapter

(6),

identification plate (13), and plate (14) from mounting

bracket (4). Discard lockwasher.

b. Installation.

NOTE

• Both front gladhands are installed the same

way. Service gladhand shown.

• Install plastic cable ties as required.

(1) Install plate (1), identification plate (2), and adapter (3)

on mounting bracket (4) with lockwasher (5), and nut (6).

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(2) Apply antiseize compound to threads of 90-degree fitting

(7).

(3) Install 90-degree fitting (7) in adapter (3).

(4) Connect air hose (8) to 90-degree fitting (7).

11-152