TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 798 of 1558

TM 9-2320-366-20-4

11-24. REAR GLADHAND REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Air tanks drained (TM 9-2320-366-10-1).

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Vise, Machinist (Item 48, Appendix C)

Socket Set, Impact (Item 33, Appendix C)

Materials/Parts

Antiseize Compound (Item 58, Appendix D)

Damping Fluid (Item 19, Appendix D)

Filter Element (Item 15, Appendix G)

Packing, Preformed (Item 192, Appendix G)

Lockwasher (Item 69, Appendix G)

Personnel Required

(2)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

NOTE

Both rear gladhands are removed the same

way. EMERGENCY gladhand shown.

(1) Remove dummy coupling (1) from gladhand (2).

(2) Disconnect air hose (3) from reducer fitting (4).

NOTE

Steps (3) and (4) require the aid of an

assistant.

(3) Remove reducer fitting (4) from adapter fitting (5).

(4) Remove nut (6), lockwasher (7), gladhand (2), and

identification plate (8) from rear crossmember (9).

Discard lockwasher.

11-154

Change 1