TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 899 of 1558

TM 9-2320-366-20-4

Change 2

13-11

13-6.

STEERING COLUMN REPLACEMENT

This task covers:

a.

Removal

b.

Installation

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Turn signal switch removed (para 7-26).

Cab raised (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Tools and Special Tools (Cont)

Wrench, Torque, 0-200 lb-in. (Item 59,

Appendix

C)

Wrench Set, Socket (Item 49, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Materials/Parts

Sealing Compound (Item 55.2, Appendix D)

Washer, Spring (2) (Item 292, Appendix G)

Locknut (Item 68, Appendix G)

Nut, Self-Locking (4) (Item 128, Appendix G)

a. Removal.

(1)

Remove four self-locking nuts (1), eight washers (2),

and four screws (3) from steering column assembly

(4). Discard self-locking nuts.

(2)

Remove locknut (5) and bolt (6) from steering gear

arm universal joint (7).

Discard locknut.

(3)

Disconnect steering gear arm universal joint (7) from

steering gear input shaft (8).

(4)

Lower cab (TM 9-2320-366-10-1).