TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 903 of 1558

TM 9-2320-366-20-4

Change 2

13-15

13-7.

POWER STEERING HOSES AND TUBE REPLACEMENT

This task covers:

a.Return Hose Removal

b.Return Hose Installation

c.Pressure Hose Removal

d.Pressure Hose Installation

e. Suction Hose and Tube Removal

f.

Suction Hose and Tube Installation

g. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Cab raised (TM 9-2320-366-10-1).

Power steering reservoir drained (Appendix H)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Dispensing Pump, Hand Driven (Item 5,

Appendix C)

Tools and Special Tools (Cont)

Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)

Materials/Parts

Cap and Plug Set (Item 13, Appendix D)

Ties, Cable, Plastic (Item 69, Appendix D)

Oil, Lubricating, OE/HDO 10 (Item 42, Appendix D)

Nut, Self-Locking (2) (Item 150, Appendix G)

Clamp (Item 8, Appendix G)

Clamp (Item 9, Appendix G)

a. Return Hose Removal.

(1)

Loosen hose clamp (1) on return hose (2).

(2)

Disconnect return hose (2) from steering gear box

(3).

WARNING

CAUTION

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

Cap or plug hydraulic connections to prevent

contamination of power steering system.

Failure to comply may result in damage to

equipment.