TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 912 of 1558

TM 9-2320-366-20-4

13-24

Change 2

13-7.

POWER STEERING HOSES AND TUBE REPLACEMENT (CONT)

(4)

Position clamp (4) on suction hose (8).

(5)

Install suction hose (8) on power steering reservoir

(9).

(6)

Engage as many clamp tabs (6) as possible in tab

windows (7) allowing little or no play between

clamp (4) and suction hose (8).

(7)

Tighten clamp (4) to 8-9 lb-in. (1 N

•

m).

(8)

Measure gap on clamp (4).

CAUTION

Clamp tongue must be started in clamp

groove.

Failure to comply may result in

damage to equipment.

NOTE

Minimum allowable gap on clamp is 0.2 in.

(0.5 cm).

If gap is less than 0.2 in. (0.5 cm),

remove and re-install clamp.