TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 914 of 1558

TM 9-2320-366-20-4

13-26

Change 1

13-8.

POWER STEERING PUMP RESERVOIR AND BRACKET REPLACEMENT

This task covers:

a.Removal

b.Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Auxiliary starter solenoid removed (para 7-6).

Power steering pump reservoir drained (Appendix H).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Dispensing Pump, Hand Driven (Item 5, Appendix C)

Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)

Materials/Parts

Cap and Plug Set (Item 14, Appendix D)

Oil, Lubricating, OE/HDO 10 (Item 42, Appendix

D)

Nut, Self-Locking (2) (Item 156, Appendix G)

Clamp (Item 8, Appendix G)

Clamp (Item 9, Appendix G)

a. Removal.

(1)

Pry hose clamp end (1) open.

(2)

Disconnect return hose (2) from power steering

pump reservoir (3).

(3)

Remove hose clamp (1) from return hose (2).

Discard hose clamp.

CAUTION

Cap or plug hydraulic connections to prevent

contamination of power steering system.

Failure to comply may result in damage to

equipment.

NOTE

Perform steps (1) through (3) on vehicles

that have not previously had a power

steering pump reservoir or power steering

return hose replaced.