TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 975 of 1558

TM 9-2320-366-20-4

14-6. M1088 MOUNTING BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix

C)

Wrench Set, Socket (Item 51, Appendix C)

Material/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item

20, Appendix D)

Washer, Spring (2) (Item 289, Appendix G)

Washer, Spring (2) (Item 296, Appendix G)

Nut, Self-Locking (6) (Item 128, Appendix G)

Lockwasher (4) (Item 112, Appendix G)

NOTE

Vehicle serial numbers 0001 through 2359

were not originally equipped with gladhand

selector valves. Vehicle serial numbers 2360

and higher are equipped with gladhand

selector valves.

M1088 without gladhand

selector valves shown.

a. Removal.

(1) Remove four self-locking nuts (1), screws (2) and

mounting bracket (3) from platform (4).

Discard self-

locking nuts.

NOTE

Tag wires and connection points prior to

disconnecting.

(2) Remove two nuts (5), spring washers (6), screws (7),

and dust cap lanyards (8) from mounting bracket (3).

Discard spring washers.

(3) Remove two nuts (9), spring washers (10), and

connectors P134 (11) and P133 (12) from mounting

bracket (3). Discard spring washers.

Change 1

14-45