TM-9-2320-366-20-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4 - Page 978 of 1558
TM 9-2320-366-20-4
14-7. M1088 UPPER PLATFORM REPLACEMENT
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Air tanks drained (TM 9-2320-366-10-1).
Worklight assembly removed (para 7-42).
M1088 mounting bracket removed (para 14-6).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Washer, Spring (8) (Item 296, Appendix G)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Antiseize Compound (Item 58, Appendix D)
Nut, Self-Locking (2) (Item 156, Appendix G)
Nut, Self-Locking (2) (Item 169, Appendix G)
Nut, Self-Locking (2) (Item 154, Appendix G)
Nut, Self-Locking (3) (Item 155, Appendix G)
Lockwasher (Item 89, Appendix G)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
a. Removal
NOTE
• Vehicle serial numbers 0001 through 2359 were
not originally equipped with gladhand selector
valves. Vehicle serial numbers 2360 and higher
are equipped with gladhand selector valves.
M1088 with gladhand selector valves shown.
• Tag hoses and connection points prior to
disconnecting.
(1) Disconnect two air hoses (1) from 45-degree fittings (2).
NOTE
Perform steps (2) and (3) on vehicles
equipped with gladhand selector valves.
(2) Disconnect hose (3) from 90-degree fitting (4).
(3) Disconnect hose (5) from 90-degree fitting (6).
14-48
Change 1
Back to Top
