TM 9-2320-366-20-5
Change 2
17-137
17-29.
M1089 30K WINCH PNEUMATIC MANIFOLD REPLACEMENT/REPAIR
This task covers:
a.Removal
b.Disassembly
c.Cleaning/Inspection
d. Assembly
e. Installation
f.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-57).
Air tanks drained (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Soldering and Brazing Outfit, Resistance Heating
(Item 73, Appendix B)
Heater, Gun Type, Electric (Item 24, Appendix B)
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)
Screwdriver Attachment, Socket Wrench (Item 51,
Appendix B)
Materials/Parts
Ties, Plastic Cable (Item 69, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Rag, Wiping (Item 50, Appendix D)
Dry Cleaning Solvent (Item 65, Appendix D)
Solder, Tin Alloy (Item 64, Appendix D)
Insulation Sleeving, Electrical (Item 29.1
Appendix D)
Tape, Antiseizing (Item 66, Appendix D)
Tape, Insulation, Electrical (Item 68, Appendix
D)
Nut, Self-Locking (4) (Item 137, Appendix G)
Semiconductor Device, Diode (8) (Item 274.1,
Appendix G)
Personnel Required
(2)
a. Removal.
(1)
Disconnect six hoses (1) from fittings (2).
(2)
Disconnect two hoses (3) from tee fitting (4).
NOTE
Tag hoses and connection points prior to
disconnecting.