TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 193 of 1158

TM 9-2320-366-20-5

Change 2

17-147

d.

Assembly.

(1)

Apply sealing compound to threads of two plugs

(1), fitting (2), 90-degree fittings (3 and 4), and pipe

nipple (5).

(2)

Install two plugs (1) in regulating valve (6).

(3)

Install pipe nipple (5), fitting (2), and 90-degree

fitting (3) in shuttle valve (7).

(4)

Install regulating valve (6) on pipe nipple (5).

(5)

Install 90-degree fitting (4) in regulating valve (6).

WARNING

NOTE

•

Install fittings in the same orientation

as noted during removal.

•

Install fittings, plugs, and pipe nipple

in steps (2) through (5) finger tight,

then wrench tighten an additional 2-3

turns.

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water.

Failure

to comply may result in injury to

personnel.