TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 219 of 1158

TM 9-2320-366-20-5

18-4. WINDSHIELD WIPER MOTOR REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

PDP cover removed (para 16-2).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Wrench Set, Socket (Item 51, Appendix C)

Materials/Parts

Ties, Cable, Plastic (Item 69, Appendix D)

Nut, Self-Locking (Item 172, Appendix G)

a. Removal.

(1) Remove three screws (1) and washers (2) from PDP (3).

(2) Remove three screws (4) from PDP (3).

(3) Lift PDP (3) outward to gain access.

NOTE

Remove plastic cable ties as required.

(4) Disconnect connector PX22 (5) from wiper motor (6).

(5) Remove self-locking nut (7) and washer (8) from wiper

motor (6). Discard self-locking nut.

NOTE

Note orientation of wiper arm prior to

removal.

(6) Remove wiper arm (9) from wiper motor (6).

18-9