TM 9-2320-366-20-5
18-5. WINDSHIELD WIPER LINKAGE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-57).
Windshield wipers and nozzles removed (para
18-3).
PDP cover removed (para 16-2).
Personnel heater removed (para 18-9).
Instrument panel assembly removed for
access (para 7-15).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Material/Parts
Washer, Flat Rubber (3) (Item 281, Appendix G)
Nut, Self-Locking (6) (Item 128, Appendix G)
Nut, Self-Locking (Item 172, Appendix G)
a. Removal.
(1) Remove three collars (1), nuts (2), washers (3), and
rubber washers (4) from wiper shafts (5).
(2) Remove three screws (6) and washers (7) from PDP (8).
(3) Remove three screws (9) from PDP (8).
(4) Lift PDP (8) outward to gain access.
18-12