TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 233 of 1158

TM 9-2320-366-20-5

Change 2

18-23

18-7.

CAB MIRROR REPLACEMENT

This task covers:

a.Removal

b. Installation

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Tools and Special Tools (Cont)

Screwdriver Attachment, Socket Wrench (Item

58, Appendix B)

Materials/Parts

Nut, Self-Locking (2) (Item 167, Appendix G)

Nut, Self-Locking (2) (Item 138, Appendix G)

Lockwasher (Item 105.3, Appendix G)

a. Removal.

(1)

Remove nut (1), washer (2), convex mirror (3), and

washer (2) from bracket (4).

(2)

Remove self-locking nut (5), washer (6), and bracket

(4) from cab mirror (7).

Discard self-locking nut.

(3)

Remove self-locking nut (8), washer (9), and cab

mirror (7) from mirror arm (10).

Discard self-locking

nut.

NOTE

•

Left and right cab mirrors are removed

the same way. Left side shown.

•

Perform steps (1) and (7) convex mirror

mounted with bracket.