TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 242 of 1158

TM 92320-366-20-5

18-26

Change 2

18-8.

DEFROST COVER REPLACEMENT

This task covers:

a. Removal (All Models Except M1093/M1094)

b. Installation (All Models Except M1093/M1094)

c. M1093/M1094 Removal

d. M1093/M1094 Installation

e. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

M1093/M1094 cab roof removed (para 16-4).

Dump switch bracket removed (para 7-146).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Materials/Parts

Seal, Urethane Foam (86.75 in. (220.3 cm)) (Item

272,

Appendix G) (all models except M1093/ M1094)

Materials/Parts (Cont)

Seal, Urethane Foam (102.25 in. (259.7 cm))

(Item 274, Appendix G) (all models except

M1093/M1094)

Seal, Urethane Foam (36.25 in. (92.1 cm)) (Item

273, Appendix G) (M1093/M1094)

Seal, Urethane Foam (37.5 in. (95.2 cm)) (Item

272, Appendix G) (M1093/M1094)

Personnel Required

(2)

a. Removal (All Models Except M1093/M1094).

(1)

Remove six screws (1), washers (2), and defrost

cover (3) from dashboard (4).

(2)

Remove six clip nuts (5) from dashboard (4).

(3)

Remove seals (6 and 7) and two seals (8) from

defrost cover (3).

Discard seals.

(4)

Remove two seals (9) from defrost cover (3).

Discard seals.

NOTE

Note position of seals prior to removal.