TM-9-2320-366-20-5
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-5 - Page 246 of 1158
TM 9-2320-366-20-5
18-9. PERSONNEL HEATER REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
CTIS ECU removed (para 12-6).
Auxiliary panel removed, if equipped (para 7-8).
Kick panel removed (para 16-3).
Tools and Special Tools
Pan, Drain (Item 24, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
Tool Kit, Blind Rivet (Item 44, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Strap, Push Mount (2) (Item 65.1, Appendix D)
Materials/Parts (Cont)
Antifreeze, Ethylene Glycol, Permanent (Item 12,
Appendix D)
Rivet, Blind (12) (Item 258, Appendix G)
Gasket (Item 30, Appendix G)
Gasket (Item 37, Appendix G)
Seal (Item 265, Appendix G)
Gasket (Item 32, Appendix G)
Gasket (Item 38, Appendix G)
Gasket (2) (Item 33, Appendix G)
Gasket (Item 34, Appendix G)
Gasket (Item 35, Appendix G)
Rag, Wiping (Item 50, Appendix D)
Solvent, Dry Cleaning (Item 65, Appendix D)
Soap, Laundry (Item 63, Appendix D)
Gasket (3) (Item 40, Appendix G)
Gasket (Item 36, Appendix G)
Plastic Strip (Item 240, Appendix G)
Nut, Self-Locking (3) (Item 177, Appendix G)
Nut, Self-Locking (3) (Vehicle serial numbers
0001 through 3696 equipped with original
personnel heaters) (Item 177, Appendix G)
Decal (Item 11, Appendix G)
NOTE
Perform steps (1) through (25) to remove
personnel heater assembly for access.
a. Removal.
WARNING
Wear appropriate eye protection when
working
under
vehicle
due
to
the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
(1) Position drain pan under radiator drain cock (1).
(2) Open radiator drain cock (1) and drain approximately 15-
20 qt (14-19 L) of coolant from radiator (2).
(3) Close radiator drain cock (1).
18-30
Change 1
Back to Top
