TM-9-2320-366-20-5
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-5 - Page 280 of 1158
TM 9-2320-366-20-5
18-11. PERSONNEL HEATER CONTROL GUARD REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 79, Appendix C)
Wrench, Torque 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
a. Removal.
Remove four screws (1), washers (2), and personnel heater
control guard (3) from personnel heater (4).
b. Installation
NOTE
Perform step (1) on vehicles not equipped
with personnel heater guard.
(1) Remove four screws (1) from personnel heater (2).
Discard screws.
18-64
Back to Top
