TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 421 of 1158

TM 9-2320-366-20-5

d. Cleaning/Inspection.

WARNING

•

Dry Cleaning Solvent (P-D-680) is TOXIC and flammable.

Wear protective goggles and

gloves; use only in well-ventilated area; avoid contact with skin, eyes, and clothes, and do

not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the

flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C).

Failure to comply may result in serious injury or death to personnel.

•

If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and

medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry

Cleaning Solvent contacts eyes, immediately flush eyes with water and get immediate

medical attention. Failure to comply may result in injury to personnel.

(1) Clean all metal parts with dry cleaning solvent.

NOTE

Replace any part that fails visual inspection.

(2) Inspect all parts for visible cracks or damage.

e. Manifold Assembly.

(1) Place 90-degree fitting (1) in vise.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(2) Apply antiseize compound to threads of 45-degree fitting

(2).

(3) Install 45-degree fitting (2) on 90-degree fitting (1) with

matchmarks aligned.

19-105