TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-5 - Page 512 of 1158

TM 9-2320-366-20-5
20-53. BATTERY TO 200 AMP TERMINAL BLOCK 24 VDC CABLE ASSEMBLY
REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Spare tire lowered (TM 9-2320-366-10-2).
Cab raised (TM 9-2320-366-10-1).
Batteries disconnected (para 7-57).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 69, Appendix D)
Lockwasher (Item 96, Appendix G)
a. Removal.
WARNING
Remove rings, bracelets, watches, neck-
laces,
and
any
other
jewelry
before
working around vehicle.
Jewelry can
catch on equipment and cause injury or
short across electrical circuit and cause
severe
burns
or
electrical
shock.
Batteries can explode from a spark.
Battery acid is harmful to skin and eyes.
Always wear eye protection and rubber
gloves
when
working
with
batteries.
Failure to comply may result in injury to
personnel.
(1) Remove nut (1) and terminal lugs TL39 (2) and TL10 (3)
from battery cable BT1 E1 (4).
20-296


Back to Top