TM 9-2320-366-20-5
Change 2
20-433
(13) Remove two tiedowns (20 and 7) from four crane
pockets (21).
(14) Raise ladder (TM 9-2320-366-10-1).
(15) Install four plugs (19) in crane pockets (21) with quick
release pins (18).
(16) Remove 12 screws (6), lockwashers (22), washers
(23), two stops (9), sliders (8), and spacers (24)
from left and right tiedowns (20 and 7). Discard
lockwashers.
CAUTION
Ensure quick release pins are installed
through both sides of crane pockets.
Failure
to comply may result in damage to
NOTE
All tiedowns are disassembled the same
way. Both left and right tiedowns shown.