TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 657 of 1158

TM 9-2320-366-20-5

Change 2

20-435

20-75.

M1085 S-280 SHELTER MODELS A, B, OR C TIEDOWN KIT INSTALLATION/

REMOVAL

This task covers:

a.

Installation

b.

Removal

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Cargo bed side panels and stakes removed (TM 9-2320-

366-10-1).

Tools and Special Tools

Drill set, Twist (Item 8, Appendix C)

Drill, Portable, Electric (Item 7, Appendix C)

Tap, Thread, Cutting (Item 41.3, Appendix C)

Tap and Die Set (Item 41.2, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Sling, Cargo (2) (Item 31, Appendix C)

Materials/Parts

Nut, Self-Locking (4) (Item 159, Appendix G)

Lockwasher (8) (Item 73.1, Appendix G)

Personnel Required

(2)

a. Installation.

(1)

Measure and mark a line (1) 1.25 in (32 mm) down

from upper RH corner of tiedown bracket (2).

(2)

Measure and mark a line (3) 4.4 in (109 mm) from

RH side of line (1).

(3)

Measure and mark a line (4) 4.72 in (120 mm) from

RH side of line (3).

NOTE

Overall height for shelter models A, B, or C

is 83 1/2 to 89 in. (214 to 226 cm).

If shelter

height is below 83 1/2 in. (214 cm), shorten

cable to remove slack in turnbuckle

assembly.

NOTE

•

Perform steps (1) through (6) on

tiedowns not originally modified.

•

All tiedowns are modified the same way.

RH front tiedown shown.

•

Measurements will be taken from upper

LH corner on LH tiedown bracket.