TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 743 of 1158

TM 9-2320-366-20-5

Change 2

20-517

20-81.

DIGITIZATION KIT POWER CABLE REMOVAL/INSTALLATION

This task covers:

a.

Removal

b.

installation

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1)

Batteries discounted (para 7-57)

Kick panel removed (para 16-3)

Power Distribution Panel removed for access

(para 16-2)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Tool Kit Electrical Contact Repair (Item 45

Appendix C)

Materials/Parts

Lockwasher (2) (Item 113.1, Appendix G)

Ties, Cable, Plastic (Item 69, Appendix D)

Lockwasher (6) (Item 107.1, Appendix G)

Dispenser Pressure Sensitive Adhesive Tape (Item

20, Appendix D)

Terminal Lug (Item 279.01, Appendix G)

Nut, Self-Locking (Item 146.1, Appendix G)

Personnel Required

(2)

a. Removal.

(1)

Remove nut (1), lockwasher (2), washer (3), and

terminal lug TL21 (4) from ground stud (5). Discard

lockwasher.

(2)

Disconnect terminal lug TL14 (6) from terminal block

TB2 connector 5 (7).

NOTE

Perform steps (1) through (4) on vehicle

serial numbers 00001 through 11437.