TM 9-2320-366-20-5
20-554
Change 2
20-86.
RH CONVEX MIRROR INITIAL INSTALLATION
This task covers:
a.
Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque 1-200 lb-in (Item 59, Appendix C)
a. Installation.
(1)
Remove nut (1) and washer (2) from mirror (3).
(2)
Position mirror (3) on bracket arm (4) with washer (2)
and nut (1).
(3)
Remove nut (5), washer (6), and screw (7) from mirror
arm (8).
(4)
Position bracket arm (9) on mirror arm (8) with clip
(10), screw (11), and nut (12).
(5)
Position bracket arm (4) on mirror arm (8) with screw
(7), washer (6), and nut (5).