TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 786 of 1158

TM 9-2320-366-20-5

Section II. MAINTENANCE PROCEDURES

21-2. MACHINE GUN RING REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58,

Appendix C)

Tools and Special Tools (Cont)

Crowfoot Attachment, Socket Wrench (Item 10, Appendix

B)

Personnel Required

(2)

a. Removal.

(1) Remove 12 screws (1) and washers (2) from machine

gun ring (3).

(2) Position three wooden blocks on cab roof (4).

WARNING

Machine

gun

ring

assembly

weighs

approximately 350 lbs (159 kgs). Attach a

suitable lifting device prior to removal.

Failure to comply may result in injury to

personnel or damage to equipment.

NOTE

Steps (3) through (7) require the aid of an

assistant.

(3) Position machine gun ring (3) on three wooden blocks.

(4) Re-position lifting device on machine gun ring (3).

21-2

Change 1