TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 794 of 1158

TM 9-2320-366-20-5

21-8.2

Change 2

21-5.

MACHINE GUN RING CENTER SEAT REPLACEMENT (CONT)

b. Installation.

(1)

Apply sealing compound to threads of two screws (1).

(2)

Position center seat (2) on platform (3).

(3)

Position washers (4) and

screws (1) in seat mount (5).

(4)

Position two spacers (5.1), washers (4), and

screws (1) in seat mounts (5).

(5)

Slide center seat (2) fully forward.

(6)

Fold center seat (2) down

WARNING

Adhesive

Sealant

MIL-S-46163

can

damage your eyes.

Wear safety goggles

when using; avoid contact with eyes.

If

sealant contacts eyes, flush eyes with

water

and

get

immediate

medical

attention.

Failure to comply may result in

injury to personnel.

NOTE

•

Flat sides of screw will be in line with seat

tracks.

•

Perform step (3) on vehicles with cabs

S/N 12075G or lower.

NOTE

•

Perform step (2) on vehicles with cabs

S/N 12075G or lower. Cab S/N located on

B pillar.

•

Install center seat in folded and raised

position with seat rails in the forward

position.

NOTE

Perform step (4) on vehicles with cabs S/N

12076G or higher.