TM 9-2320-366-20-5
23-6. INVERSION VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Cab raised (TM 9-2320-366-10-1).
Air tanks drained (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Antiseize Compound (Item 58, Appendix D)
a. Removal.
WARNING
Wear appropriate eye protection when
working
under
vehicle
due
to
the
possibility of falling debris. Failure to
comply may result in injury to personnel.
(1) Disconnect two air hoses (1) from 90-degree fittings (2).
(2) Remove inversion valve (3) from fitting (4).
(3) Remove two 90-degree fittings (2) from inversion valve
(3).
Change 1
23-19