TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 850 of 1158

TM 9-2320-366-20-5

23-9. M1090/M1094 TAILGATE PNEUMATIC CYLINDER REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Dump body raised to maintenance position (TM

9-2320-366-10-1).

Engine shut down (TM 9-2320-366-10-1).

Air tanks drained (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Material/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item

20, Appendix D)

Antiseize Compound (Item 13, Appendix D)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

NOTE

Tag hoses and connection points prior to

disconnecting.

(1) Disconnect two hoses (1) from 90-degree fittings (2).

WARNING

Retaining rings are under tension and can

act as projectiles when released causing

severe

eye

injury.

Use

care

when

removing retaining rings.

Failure to

comply may result in injury to personnel.

(2) Remove two retaining rings (3) and pivot pin (4) from

tailgate pneumatic cylinder (5).

(3) Remove cotter pin (6), pivot pin (7), and tailgate

pneumatic cylinder (5) from dump body (8).

23-26