TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 858 of 1158

TM 9-2320-366-20-5

23-34

Change 2

23-11.

AIR DRYER REPLACEMENT/REPAIR

This task covers:

a. Removal

b. Disassembly

c. Assembly

d. Installation

e. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Air tanks drained (TM 9-2320-366-10-1).

Booster Valve Removed (Para 11-5)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Purge Valve Tool (Item E-23, Appendix E)

Hammer, Hand (Item 18, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Ties, Cable, Plastic (Item 69, Appendix D)

Nut, Plain, Hex (Item 34, Appendix D)

Boot Kit, Exhaust (Item 3, Appendix G)

Parts Kit, Dehydrator (Item 218, Appendix G)

Nut, Self-Locking (4) (Item 168, Appendix G)

Personnel Required

(2)

a. Removal.

(1)

Loosen input air hose nut (1).

(2)

Disconnect input air hose (2) from 90-degree fitting

(3).

(3)

Disconnect outlet air hose (4) from 90-degree fitting

(5).

WARNING

Air dryer may contain air pressure.

Loosen input air hose connector slowly to

vent off air pressure.

Failure to comply

may result in injury to personnel.

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.