TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 878 of 1158

TM 9-2320-366-20-5

23-12. WET TANK REPLACEMENT (CONT)

WARNING

Adhesives,

solvents.

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(9) Apply antiseize compound to threads of pressure switch

(6).

(10) Install pressure switch (6) in wet tank (2).

NOTE

Perform step (11) on vehicles not previously

equipped with corrosion enhanced clamps.

(11) Position two clamps (7) on battery box (8).

(12) Position wet tank (2) in two clamps (7) with self-locking

nuts (9).

(13) Tighten two self-locking nuts (9) to 4-5 lb-ft. lb-ft (5-7

N·m).

(14) Connect connector P84 (10) to pressure switch (6).

23-54

Change 1