TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-5

  TM-9-2320-366-20-5 - Page 90 of 1158

TM 9-2320-366-20-5
17-14. M1089 MATERIAL HANDLING CRANE (MHC) HOSES REPLACEMENT
This task covers:
a. Hydraulic Hose Locations
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
MHC positioned on boom rest (TM 9-2320-366-10-2).
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Pan, Drain (Item 24, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Crowfoot Attachment, Socket Wrench (Item 12,
Appendix B)
Crowfoot Attachment, Socket Wrench (Item 11,
Appendix B)
Crowfoot Attachment, Socket Wrench (Item 5,
Appendix B)
Tools and Special Tools (Cont)
Crowfoot Attachment, Socket Wrench (Item 9,
Appendix B)
Crowfoot Attachment, Socket Wrench (Item 6,
Appendix B)
Crowfoot Attachment, Socket Wrench (Item 14,
Appendix B)
Crowfoot Attachment, Socket Wrench (Item 13,
Appendix B)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
a. Hydraulic Hose Locations.
WARNING
•
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
•
Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that
come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing
should be removed immediately. Areas in which lubricating oil is used should be well ventilated
to keep fumes to a minimum. Failure to comply may result in injury to personnel.
CAUTION
Cap or plug hoses and connection points to prevent contamination of M1089 MHC hydraulic system.
Failure to comply may result in damage to equipment.
NOTE
• Refer to
Table 17-3. M1089 Material Handling Crane (MHC) Hydraulic Hose Locations
for locations
of hydraulic hoses on the M1089 MHC. It may not be necessary to remove all hydraulic hoses at one
time.
• Tag hoses and connection points prior to removal.
• Remove plastic cable ties as required.
• Remove clamps and support brackets as required.
17-52


Back to Top