TM-9-2320-366-20-5
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-5 - Page 81 of 1158
TM 9-2320-366-20-5
Change 2
17-45
17-13.
M1089 HOOK BLOCK AND CABLE ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Inspection
d. Assembly
e. Installation
f.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
MHC erected (TM 9-2320-366-10-2).
Hoist cable extended until hook block rests on
ground (TM 9-2320-366-10-2).
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Gloves, Welders (Item 14, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Apron, Rubber (Item 3, Appendix C)
Weight, 200-250 lbs (91-113 kgs)
Material/Parts
Solvent, Dry Cleaning (Item 65, Appendix D)
Grease, Automotive and Artillery (GAA) (Item 22,
Appendix D)
Pin, Cotter (Item 233, Appendix G)
Lockwasher (Item 98, Appendix G)
Washer, Key (Item 282, Appendix G)
Pin, Cotter (8) (Item 229, Appendix G)
Pin, Cotter (Item 235, Appendix G)
Nut, Self-Locking (Item 174, Appendix G)
Clamp, Wire Rope, Saddled (Item 9.1, Appendix G)
Personnel Required
(2)
References
FM 5-125
TB 43-0142
a. Removal.
(1)
Remove cotter pin (1) from nut (2).
Discard cotter
pin.
(2)
Remove nut (2), two washers (3), screw (4) and
wedge socket (5) from boom (6).
WARNING
Cable can become frayed or contain
broken wires.
Wear heavy leather-palmed
gloves when handling cable.
Frayed or
broken wires can injure hands.
Failure to
comply may result in injury to personnel.
Back to Top
