TM 9-2320-366-20-5
17-10. M1084/M1086 HAND PUMP REPAIR (CONT)
d. Assembly.
(1) Install ball (1), spring (2), ball (3), spring (4), disk (5),
and plug (6) in pump base (7).
(2) Install preformed packing (8), wiper ring (9), and
preformed packing (10) in pump base (7).
(3) Install pump piston (11) in pump base (7).
WARNING
Retaining clips are under tension and can
act as projectiles when released causing
severe
eye
injury.
Use
care
when
installing retaining
clips.
Failure
to
comply may result in injury to personnel.
(4) Install pump linkage (12) on pump base (7) with pin (13)
and two retaining clips (14).
(5) Install pump socket (15) on pump linkage (12) with pin
(16) and two retaining clips (17).
(6) Install pump socket (15) on pump piston (11) with pin
(18) and two retaining clips (19).
17-40