TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-5 - Page 73 of 1158

TM 9-2320-366-20-5
17-10. M1084/M1086 HAND PUMP REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Pan, Drain (Item 24, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Solvent, Dry Cleaning (Item 65, Appendix D)
Rag, Wiping (Item 50, Appendix D)
Parts Kit, Hydraulic Pump (Item 219, Appendix G)
Lockwasher (4) (Item 96, Appendix G)
Packing, Preformed (4) (Item 187, Appendix G)
Gasket and Preformed Packing Kit (Item 43,
Appendix G)
a. Removal.
(1) Position drain pan under hand pump (1).
CAUTION
Cap or plug hydraulic tube and hose to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Tag tube and hose connection points prior to
disconnecting.
(2) Disconnect hydraulic hose (2) from 90-degree fitting (3).
(3) Disconnect hydraulic tube (4) from 90-degree fitting (5).
17-37


Back to Top