TM 9-2320-366-34-2
Change 2
13-349
(19) Install fittings (31 and 32) on subframe (1) with nuts
(33 and 34).
(20) Connect hose (35) to fitting (31).
(21) Connect hose (36) to fitting (31).
(22) Connect hose (37) to fitting (32).
(23) Connect hose (38) to fitting (32).
c. Follow-On Maintenance.
(1)
Install extension brackets (para 13-12).
(2)
Install rear fender (TM 9-2320-366-20-4).
(3)
Install pneumatic solenoid valve (TM 9-2320-366-
20-5).
(4)
Install fuel tank (TM 9-2320-366-20-3).
(5)
Install hydraulic manifold (TM 9-2320-366-20-4).
(6)
Install toolbox (TM 9-2320-366-20-4).
(7)
Install hydraulic reservoir (TM 9-2320-366-20-5).
(8)
Install transmission auxiliary oil cooler (TM 9-2320-366-20-4).
(9)
Install dump body switch (TM 9-2320-366-20-3).
(10) Install dump cable assembly (TM 9-2320-366-20-3).
(11) Install 15K Self-Recovery Winch (SRW) control valve, if
equipped (TM 9-2320-366-20-5).
(12) Install four-way relief valve (para 17-3).
(13) Install dump body hoist cylinder (para 17-4).
(14) Install dump body (para 15-10).
End of Task.