TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 1006 of 1434

TM 9-2320-366-34-2

13-346

Change 2

13-35.

M1090 SUBFRAME REPLACEMENT (CONT)

b. Installation.

(1)

Position subframe (1) on vehicle.

(2)

Install two covers (2 and 3) on rear tension beam

(4) with six screws (5).

(3)

Install three screws (5) in cover (2).

(4)

Position six bolts (6) washers (7) and self-locking

nuts (8) in bracket (9).

(5)

Tighten six self-locking nuts (8) to 53-58 lb-ft (72-

78 N•m).

WARNING

CAUTION

Subframe weighs approximately 630 lbs

(286 kgs).

Attach a suitable lifting

device prior to installation.

Failure to

comply may result in injury to personnel

or damage to equipment.

NOTE

Step (1) requires the aid of three assistants.

Ensure subframe rail flange is fully in contact

with main frame rail flange.

Failure to

comply may result in damage to equipment.

NOTE

•

Left and right side of subframe is installed

the same way.

Right side shown.

•

Steps (4) through (15) require the aid of an

assistant.