TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 997 of 1434

TM 9-2320-366-34-2

Change 2

13-337

13-34.

M1093 SUBFRAME RAIL REPLACEMENT

This task covers:

a.

Removal

b.

Installation

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Transmission auxiliary oil cooler removed (TM 9-2320-

366-20-4).

M1093 Parachute suspension removed (para 13-4).

Tool box removed (TM 9-2320-366-20-4).

Hydraulic manifold removed (TM 9-2320-366-20-5).

Fuel tank removed (TM 9-2320-366-20-3).

Hydraulic reservoir removed, if equipped (TM 9-2320-

366-20-5).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Tools and Special Tools (Cont)

Goggles, Industrial (Item 28, Appendix B)

Wrench, Torque, 0-600 lb-ft (Item 97, Appendix

B)

Wrench Set, Socket (Item 84, Appendix B)

Wrench, Impact, Electric (Item 88, Appendix B)

Socket Set, Impact (Item 58, Appendix B)

Materials/Parts

Nut, Self-locking (11) (Item 211, Appendix F)

Bolt (5) (Item 7, Appendix F)

Personnel

(3)

a.

Removal.

(1)

Remove four self-locking nuts (1) and bolts (2)

from front lifting bracket (3).

Discard self-locking

nuts.

WARNING

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

NOTE

Left and right side subframe rails are

removed the same way.

Right side shown.

Steps (1) through (4) require the aid of an

assistant.