TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 994 of 1434

TM 9-2320-366-34-2

13-33. M1083 SUBFRAME RAIL REPLACEMENT (CONT)

b. Installation.

WARNING

Subframe rail weighs approximately 200 lbs

(91 kgs).

Attach a suitable lifting device

prior to installation. Failure to comply may

result in injury to personnel or damage to

equipment.

NOTE

• Step (1) requires the aid of two assistants.

• Left and right side subframe rails are installed

the same way. Right side shown.

(1) Position subframe rail (1) on vehicle.

CAUTION

Ensure subframe rail flange is fully in contact

with main frame rail flange. Failure to comply

may result in damage to equipment.

NOTE

Steps (2) through (9) require the aid of an

assistant.

(2) Position ten bolts (2) and self-locking nuts (3) in frame

plate (4).

(3) Tighten ten self-locking nuts (3) to 210-225 lb-ft (285-305

N·m).

13-334