TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 143 of 1434

TM 9-2320-366-34-2

3-7. PULLEY DAMPER REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance.

INITIAL SETUP

Equipment Conditions

Engine fan and fan clutch removed (TM 9-2320-366-

20-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)

Tools and Special Tools (Cont)

Gage, Belt Tension (TM 9-2320-366-20)

Adapter, Socket Wrench (Item 3, Appendix B)

Socket Wrench Attachment, Screwdriver (Item

62, Appendix B)

Personnel Required

(2)

a. Removal.

(1) Loosen two screws (1) on idler pulley (2).

(2) Remove two alternator belts (3) from engine.

CAUTION

Damper is easily damaged and must be

handled carefully.

Failure to comply may

result in damage to equipment.

(3) Remove eight screws (4), washers (5), adapter (6),

damper (7), and pulley (8) from crankshaft pulley (9).

3-75