TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 148 of 1434

TM 9-2320-366-34-2

3-8. CRANKSHAFT FRONT SEAL REPLACEMENT (CONT)

(9) Tighten four screws (5) to 98-142 lb-ft (133-193 N·m).

(10) Position water pump belt (10) on pulley (9).

CAUTION

Maintain correct belt tension while tightening

screws.

Failure to comply may result in

damage to equipment.

NOTE

•

Belt tension for new belt is 115-125 lbs

(512-556 N). For reinstalled belt 85-95 lbs

(378-442 N).

•

Steps (11) and (12) require the aid of an assistant.

(11) Adjust water pump belt (10) to 115-125 lb (512-556 N).

(12) Tighten screws (11 and 12) to 15-25 lb-ft (20-34 N·m).

c. Follow-On Maintenance.

(1) Install pulley damper (para 3-7).

(2) Start engine (TM 9-2320-366-10-1).

(3) Raise cab (TM 9-2320-366-10-1).

(4) Check crankshaft front seal for oil leaks.

(5) Lower cab (TM 9-2320-366-10-1).

(6) Shut down engine (TM 9-2320-366-10-1).

End of Task.

3-80