TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 470 of 1434

TM 9-2320-366-34-2

7-124

Change 2

7-18.

TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT)

(3)

Position

pressure

plate

assembly

(4)

on

transmission (2) with 20 bolts (5).

(4)

Tighten 20 bolts (5) to 25-29 lb-ft (34-39 N

•

m).

(5)

Apply light coat of sealing compound to seating

surface (6) on transmission (2).

(6)

Install gasket (7) on transmission (2).

(7)

Remove five bolts (8) from adapter housing module

(9).

(8)

Position transmission lifting bracket on adapter

housing module (9) with five bolts (8).

(9)

Tighten five bolts (8) to 42-50 lb-ft (57-68 N

•

m).

WARNING

NOTE

Perform steps (3) and (4) if pressure plate

assembly was removed from transmission

serial numbers prior to 6510032369.

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water.

Failure to comply may result in injury to

personnel.

NOTE

Transmission lifting bracket is installed with

lift top-dead center facing forward.