TM 9-2320-366-34-2
7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT)
NOTE
Perform steps (64) through (69) on vehicles
equipped with transmission oil cooler
hoses.
(64) Install two preformed packings (64 and 69) on 90-
degree fittings (65 and 66).
(65) Position 90-degree fittings (65 and 66) on transmission
(2).
(66) Tighten jam nuts (67) on fittings (65 and 66).
(67) Position transmission oil cooler hose (62) on 90-
degree fitting (65).
(68) Position transmission oil cooler hose (68) on 90-
degree fitting (66).
(69) Tighten transmission oil cooler hoses (62 and 68) to
94-104 lb-ft (127-141 N·m).
NOTE
• Perform steps (70) and (71) on vehicles
equipped with transmission oil cooler hoses.
• Steps (70) and (71) require the aid of an
assistant.
(70) Position lower helilift support crossmember (70) on
vehicle with four bolts (71) and self-locking nuts (72).
(71) Tighten four self-locking nuts (72) to 295-369 lb-ft
(400-500 N·m).
7-132
Change 1