TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 482 of 1434

TM 9-2320-366-34-2

Section II. MAINTENANCE PROCEDURE

8-2. TRANSFER CASE CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR

This task covers:

a. Removal

b. Disassembly

c. Cleaning/Inspection

d. Assembly

e. Installation

f.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Batteries disconnected (TM 9-2320-366-20-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)

Wrench, Torque, 0-150 lb-in (Item 91, Appendix B)

Goggles, Industrial (Item 28, Appendix B)

Gloves, Rubber (Item 26, Appendix B)

Multimeter, Digital (Item 41, Appendix B)

Wrench Set, Socket (Item 85, Appendix B)

Materials/Parts

Gasket (Item 68, Appendix F)

Gasket (Item 71, Appendix F)

Filter Element (Item 32, Appendix F)

Packing Preformed (Item 298, Appendix F)

Packing Preformed (Item 300, Appendix F)

Rag, Wiping (Item 60, Appendix C)

Dispenser, Pressure Sensitive Adhesive Tape

(Item 30, Appendix C)

Solvent, Dry Cleaning (Item 83, Appendix C)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

(1) Remove 10 bolts (1), valve body cover (2), and gasket

(3) from transfer case module (4). Discard gasket.

8-2

Change 1