TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 491 of 1434

TM 9-2320-366-34-2

Change 2

8-10.1/(8-10-2 Blank)

(8)

Tighten four screws (11).

(8.1)

Tighten four screws (11) to 26-35 lb-ft (35-47 N

•

m).

(8.2)

Fold tabs on four screws (11).

(9)

Apply lubrication to grease fittings (TM 9-2320-

366-20).

c. Follow-On Maintenance.

(1)

Check transfer case oil level (TM 9-2320-366-20).

(1.1)Lubricate drive shaft universal joint and slip yoke

(TM 9-2320-366-20-1).

(2)

Operate vehicle and check for proper operation of

drive train (TM 9-2320-366-10-1).

(3)

Check seal for oil leaks.

End of Task.

CAUTION

NOTE

•

Perform the following step on kits

equipped with sheared screws.

•

Alternately tighten screws.

•

When correct torque is reached, bearing

cap small screw hex head will break off.

Grease must flow from all four seals.

Failure

to comply may result in damage to

equipment.

NOTE

Perform the following step on bearing cups

equipped with tabs.