TM 9-2320-366-34-2
Change 2
8-15
NOTE
(2.1)Tighten four screws (5) to 26-35 lb-ft (35-47 N•m).
(3)
Tighten four screws (5).
(3.1) Tighten four screws (5) to 26-35 lb-ft (35-47 N•m).
(3.2)Fold tabs on four screws (5).
NOTE
•
Perform the following step on kits
equipped with shear head screws.
•
Alternately tighten screws.
•
When correct torque is reached, bearing
cup small screw hex head will break off.
NOTE
Perform the following two steps on bearing
cups equipped with tabs.
Perform the following step on kits equipped
with screws P/N C5H5-24-39.