TM 9-2320-366-34-2
8-12
Change 2
8-4.
M1086/M1089 INTERMEDIATE FRONT DRIVE SHAFT AND COUPLER BEARING
REPLACEMENT/REPAIR (CONT)
(3)
Remove two self-locking nuts (6), screws (7), and
coupler bearing (8) from vehicle.
Discard self-
locking nuts.
(4)
Lift tabs from two bearing cups (9).
(4.1) Remove four screws (10) and two bearing cups (9)
from transfer case yoke (11).
Discard screws.
(5)
Remove intermediate front drive shaft (4) from
transfer case yoke (11).
(6)
Lift tabs from two bearing cups (12).
(6.1)Remove four screws (13) and two bearing cups
(12) from intermediate front drive yoke (3).
Discard screws.
(7) Remove universal joint (5) from intermediate front
drive yoke (3).
(8)
Remove two grease fittings (14) from universal
joint (5).
NOTE
Step (3) requires the aid of an assistant.
NOTE
Perform the following step on bearing cups
equipped with tabs.
NOTE
Perform the following step on bearing cups
equipped with tabs.