TM 9-2320-366-34-2
Change 2
10-3
(5)
Lift tabs from two bearing cups (8).
(5.1)Remove four screws (7) and two bearing cups (8)
from drive yoke (9).
Discard screws.
(6)
Slide drive shaft (10) from side to side and
separate universal joint (11) from drive yoke (9).
(7)
Attach drive shaft (10) to frame (6).
(8)
Remove differential air shift hose (12) from 45-
degree fitting (13).
(9) Remove 45-degree fitting (13) from intermediate
differential carrier (14).
(10) Remove two nuts (15), bolts (16) and bracket (17)
from intermediate axle assembly (18).
(11) Remove nut (19), washer (20) and bolt (21) from
lower shock absorber mount (22).
(12) Remove shock absorber (23) from lower shock
absorber mount (22).
(13) Perform steps (10) and (11) on right side shock
absorbers.
NOTE
Step (7) requires the aid of an assistant.
NOTE
Left and right side shock absorbers are
removed the same way.
Left side shown.
NOTE
Perform step (5) on bearing cups with tabs.