TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 541 of 1434

TM 9-2320-366-34-2

(15) Install seal (14) on access cover (15).

CAUTION

Washer bearing must be positioned with

grooves facing up and hole aligned with pin

in steering knuckle.

(16) Install washer bearing (16) on access cover (15).

(17) Position access cover (15) on steering knuckle (3) with

four washers (17) and screws (18).

(18) Tighten four screws (18) to 500-650 lb-ft (678-881 N·m).

(19) Install grease fitting (19) on access cover (15).

(20) Install dial indicator on front axle (2) so pointer contacts

surface of pivoting arm (4).

(21) Use floor jack and raise steering knuckle (3) to apply

pressure to access cover (15).

(22) Set dial indicator to zero.

NOTE

End play should read between 0.005-0.015

in. (0.0127-0.0381 cm).

(23) Lower floor jack from steering knuckle (3).

(24) Read end play on dial indicator.

9-27